DIY Watch club

The History and Science of Blue Hands and Screws

Demystifying the Process of Flame Bluing aka Thermal Bluing
Flame bluing, or heat bluing, has always been concurrent with traditional watchmaking. The first watch in history (arguably), The Pomander Watch, features a single blued hand. Back then, the reason for bluing a watch part was largely functional. As technology progressed, the purpose of thermal bluing transformed into an aesthetic one. In this article, we will trace this lineage of this transformation and find out why manual flame bluing is still a viable watchmaking craft nowadays.

The history, and a bit of science In traditional watchmaking, bluing is largely synonym to steel tempering. Tempering of steel is performed after the hardening process of carbon steel, as hardening would result in a steel component that is hard, but too brittle for most purposes.

The tempering process involves heating the steel part to a certain temperature, sustaining for a duration, and then cooling. It will lower the hardness while increasing the ductility of the steel part. The higher temperature the steel part is heated at, it gains more ductility at the expense of lower hardness. As a result, depending on the application, the steel may be tempered at different temperatures. For example, a spring would be tempered at a higher temperature than a screw, as we need the steel to perform with much higher ductility and withstand plastic deformation.

Why Blue

The specific temperature a steel part is tempered to corresponds to a specific balance of toughness and hardness the function of the part demands. In the early days of watchmaking, when precision thermometers were not available, finding out an accurate reading of the temperature was a difficult task. But that’s where color comes in.

As we temper carbon steel, an oxide layer will form on the surface of the steel. Depending on the temperature to which the steel is heated, the oxide layer will have a certain thickness that result in a certain color due to an phenomenon called thin film interference. Conveniently, the color, being directly linked to the tempering temperature, serves as a temperature indicator for watchmakers. The color blue shows that the steel part was heated to the right temperature and would result in the right physical properties. The oxide layer also helps with corrosion resistance. For this reason, tempering, a.k.a. thermal bluing, becomes an integral part of traditional watchmaking.

Bluing Nowadays While steel bluing had important functional significance for watchmaking back in the day, it is more about aesthetics and the preservation of traditional craftsmanship today. For the same requirement of mechanical properties and corrosion resistance, modern watchmakers have far easier and effective solutions in alloys and electroplating. Consequently, thermal bluing is now largely relegated to a cosmetic role. And even for cosmetic purpose, there are more cost effective solution with paint. Manually flame blued hands and screws are a luxury in terms of time and manpower.

That doesn’t deter some luxury brands and independent watchmakers to insist on using manually flame blued parts in their watches. Properly blued steel parts are still very much desired as the blue color resulting from the beautiful reflection of the oxide layer possesses a sense of depth unrivaled by that of plating or painting. And the parts that are individually blued by hands show a subtle difference in hue as a result of the human variance. At a luxury price point, this is less perceived as a defect but rather a mark of the human craftsmanship that goes behind each part of the watch.

With flame bluing becoming more of a niche craft, it is good to remind ourselves about the lineage of craftsmanship that exists behind each blue screws, and appreciate the work and craftsmanship that went into it. It’s not just a color, it’s a craft.


Brand Logo




Kowloon City, Kowloon, Hong Kong

You can also get in touch with an

authorized retailers


The most complete and tested DIY mechanical watch material.
They have helped thousands of people with their very own DIY mechanical watches.
By offering their kit on WatchDNA, now we are bringing this DIY watchmaking experience to you.

With over 15 thousand successes and a higher than 99.95% success rate, we have confidence that the watch will be built successfully. We are now the #1 provider of such kits and teaching materials, so rest assured that our step-by-step video tutorial will make the DIY process very enjoyable 🙂


Tsuen Wan, NT, Hong Kong


Check out their forum if you have watchmaking-related questions.